| While travelling by a train or bus, we generally lock our luggage using a
chain-and-lock arrangement. But, still we are under tension, apprehending that somebody
may cut the chain and steal our luggage. Here is a simple circuit to alarm you when
somebody tries to cut the chain. |
| Transistors T1 enables supply to the sound
generator chip when the base current starts flowing through it . When the wire (thin
enameled copper wire of 30 to 40 SWG, used for winding transformers) loop around the chain
is broken by somebody, the base of transistor T1, which was earlier tied to positive rail,
gets opened. As a result, transistor T1 gets forward biased to extend the positive supply
to the alarm circuit. In idle mode, the power consumption of the circuit is minimum and
thus it can be used for hundreds of travel hours. |
To
enable generation of different alarm sounds, connections to pin 1 and 6 may be made as per
the table.
| Select 1 (Pin6) |
Select 2 (Pin6) |
Sound effect |
| X |
X |
Police siren |
| VDD |
X |
Fire-engine siren |
| VSS |
X |
Ambulance siren |
| "_" |
VDD |
Machine-gun sound |
| Note: X = no connection ; "_" = do
not care |
|
 http://www.mylab.itgo.com
|
|
